How and when to sow the lawn, the optimal timing

After the construction of the house, the turn of the improvement of the site comes. A green, fluffy lawn becomes an integral part of the completed construction. The main element of the landscape is the lawn, it emphasizes the style and provides a beautiful backdrop. The question arises about sowing lawn grass around the house.

Seemingly, at first glance, a simple lesson has many subtleties and nuances. To avoid subsequent alterations, it is necessary to carry out a number of activities: decide on the laying of communications, prepare the soil, select seed and decide on the planting period.

Lawn sowing time

The success of a quality lawn depends on two factors: heat and moisture. Therefore, it is very important to adhere to the optimal planting dates.

  • The most favorable for sowing grass is the spring period. In early April, after the snow melts and the earth stops sticking to your feet, you can start working on the lawn. Until mid-May, you can calmly and measuredly plan and carry out all the preparatory work. There is enough time for care, top dressing, grass overseeding (if necessary). By the end of summer, you will have a full-fledged, beautiful lawn.
  • June is considered the second, no less successful sowing period. During this period, tillage (treatment) from weeds is very good. For good growth of lawn grass, enough heat and moisture. This sowing can be successful only if regular watering is ensured. With a lack of moisture, a hot month can make the lawn of poor quality. Daily watering, until friendly germination appears, is required.
  • If you still left the sowing of the lawn for the fall, you need to do this in September and be sure to finish before mid-October. There are a number of advantages to this landing time. Cloudy weather and an abundance of rainfall minimize lawn grass care. Sow no later than 40 days before the first frost. The young lawn cover will have enough time to take root and prepare for wintering. Germination will undoubtedly be rare, and seedlings will be weak. When spring comes, everything will change, the green cover will please you.
  • Roll method of planting a lawn.

    The easiest and fastest way to make a green lawn is to use a rolled lawn. The preparatory period of this method is not long and comes down to leveling the site and removing weeds. Rolls are spread on the prepared ground. You will get a beautiful, green lawn in a short time. The disadvantages of this method are that it quickly becomes unusable and requires regular replacement.

    Important! Do-it-yourself sowing technology includes a number of activities: soil preparation, rough leveling, weed removal, cultivation, fine leveling and sowing.

    Soil preparation for lawn sowing

    It is better to arrange the lawn before you start laying the paths. To improve the lawn, adhering to the correct sowing technology, you will need about 3 months. You need to start arranging the lawn with markings, decide on the placement of the tracks.

    Rough leveling procedure

    Leveling the soil under the lawn does not mean that you have to do everything on the same level. The site may be sloping, have hills. The lawn area must be carefully cleared of debris. There should be no holes, bumps, bumps and bumps on the surface. The bumps must be cut and the holes filled. The smoother the surface, the easier it will be to care for it. One of the options for rough leveling is the removal of the topsoil.

    Weed removal methods

  • Weed removal can be carried out in many ways, it all depends on what time frame you want to meet.
  • If you dig up the soil for a lawn before winter, then the roots of weeds during the winter frosts will freeze. In this case, plan to sow lawn grass in mid-April or early May.
  • Limiting light access is a great way to slow grass growth in your yard. Cover the area intended for the lawn with bark from the spring, in the fall you can start sowing the lawn.
  • Cutting the soil cardinally solves the problem of weed removal. The soil is removed in a 20-25 cm layer, a new layer of soil is laid on the vacated place.
  • Herbicide treatment (dressing) is very popular when preparing a lawn area, many gardeners use this method. The Ruandap remedy has proven itself well. Weeds are treated with a solution and die within a month. This method is used in the autumn period, and the sowing of the lawn is planned for the spring.
  • Considering all the necessary time to remove weeds, you can choose the most suitable method for you and orient yourself with the timing of sowing lawn grass.

    cultivation

    After removing the weeds, you need to dig the lawn space. The depth should be at least 20 cm. Digging the soil will additionally treat the soil from weeds. The introduction of additional elements can be combined with digging. Depending on the composition of the soil, you can add peat, sand, manure or humus for good airiness.

    A day before sowing, mineral fertilizers are applied. In summer and spring, use complexes with a high nitrogen content. Eliminate or minimize nitrogen fertilizers during the autumn period of sowing the lawn.

    Fine leveling

    The final leveling is carried out before sowing. The entire surface is carefully loosened and leveled with a fan rake, so that the applied mineral fertilizers are mixed with the soil. Do not leave large earth clods and mounds on the site. The smoother the area, the easier the mower will slide.

    Features of sowing lawn grass

  • Sowing is best done in squares. Divide the plot into squares in advance, and calculate the consumption of seed. About 4-5 kg ​​of seed mixture is consumed per one hundred square meters.
  • It is recommended to sow seeds first along the plot, and then across. This method allows you to get uniform germination without voids and bald spots.
  • Shallowly (2 cm), level the seeds with soil with a rake.
  • Roll over the surface with a lawn roller and pack the soil along with the seeds so the wind doesn’t blow your crops away. Instead of a skating rink, you can use a barrel filled with water.
  • After sowing and compacting the soil, it is necessary to water the area with a drip method or by sprinkling, preventing soil erosion.
  • Use a lawn planter to distribute fertilizer and sow seeds. Manual and mechanical planters distribute seeds and fertilizer evenly over the soil surface, which allows you to get a smooth, beautiful lawn without bald spots.

    The subtleties of lawn care

  • After sowing the lawn, it is not recommended to walk around the site; wide boards can be laid for movement (if necessary).
  • Water the lawn after planting every day, until friendly shoots appear. After emergence, watering can be reduced to 2 waterings per week.
  • As soon as the grass reaches 15 cm in height, you can start mowing the lawn. Lawn mowing should be done once a week. The height of the grass should remain at least 4-5 cm.
  • Be sure to clean the cut grass, use a fan rake for cleaning.
  • Regularly remove emerging weeds, do not give them the opportunity to disperse.
  • Aerate regularly. Oxygenation of the soil helps the root system to actively develop. Use a rake aerator or a roller aerator. If it is not possible to use specialized devices, drive nails into the soles of old shoes and walk around the lawn in it.
  • When planning a lawn planting, it may seem like a very time-consuming task, but it is not. In fact, gardeners spend a lot of time just leveling and weeding. After the emergence of seedlings, much less time is spent on lawn care.

    By following lawn planting technology, you can avoid serious mistakes and create beautiful, fluffy, green lawns with your own hands.

    LEAVE A RESPONSE

    Ваш адрес email не будет опубликован. Обязательные поля помечены *

    Related Posts